Tams Elektronik Light Computer Next Generation, ready-device in a case, Dim.: 39 x 31 x 13mm, for analog and digital model railways, offers solutions for lighting different scenarios: In the city, in and on houses, along the street, to the Protection of road traffic, in workshops, railway buildings, fire stations and on the amusement, even "real" fire, atmospheric candlelight, flickering neon tubes and the flashlights of photographers are available with the LC-NG modules. The modules can be cascaded. The complete instructions can be downloaded in advance from Tams. GENERAL CHARACTERISTICS: Supply voltage 10-18V AC or 10-22V DC, current consumption (without connected consumers) approx. 40mA, max. total current 1,000mA, max. current per output 200mA, depending on the variant 14 different outputs for LEDs (via series resistors!), Lamps, loudspeakers *), servos **) or other subordinate circuits, each with 1 switching input for buttons or switches to trigger the processes, with a potentiometer for process speed or pause length, with terminal blocks for simple and safe connection of the cables. Included in this variant group for optional orders are the loudspeaker set, the servo set, the Servo Tower Pro SG90 alone, the servo mount, the servo circuit board alone, the power block and the circuit board fastening set. A small note about the stored sounds: The LC modules are not intended as sound modules. The saved sounds are simple noises (e.g. siren, horn). They should round off the scenery - without much effort and with the simplest of means. NOT included in the scope of delivery: Models, LEDs, lamps, buttons, switches and servos.

INDIVIDUAL properties:

LC-NG-01: City lighting, 14 outputs for lighting, cascadable up to 4 modules, start and stop Stop process, potentiometer for pause length

LC-NG-02: Residential houses (version from June 2021 on), 2x each 6+1 outputs for lighting + television set, for 2 apartments or houses, program variants synchronization with other modules NG-02, potentiometer for process speed

LC-NG-03: Office and commercial buildings, 8+1+5 outputs for rooms+stairwell+neon signs, lighting on/off, potentiometer for max. pause length from 60sec. up to 12min.

LC-NG-04: Street lights, 14 outputs for lighting, 2 program options for street lights or gas lights, lights on/off, potentiometer for pause length

LC-NG-05: Road traffic, 6+1+1+5+1 outputs for traffic lights+hazard warning lights+radar trap+car lights+loudspeakers *) (horn), program variant 3 country-specific signal sequences, yellow flashing or normal operation, potentiometer for pause length

LC-NG-06: Operational tools, 13+1 outputs for flashing lights+loudspeakers *) (horn), program variant single or double flasher, potentiometer for start mode switch or with voltage

LC-NG-07: Road construction site, 7+4+1+2 outputs for running light+warning lights+flashing light+servos **), fast flashing (approx. 1Hz), slow flashing (approx. 0.5Hz), rising and falling light, manual or automatic servo movement, potentiometer for process speed

LC-NG-08: Fire station, 1+5+1+1+5+1 outputs for loudspeakers *) (horn)+blue lights+servo+servo **)+lighting+alarm lamp, program variant single or double flasher, processes normal and alarm, potentiometer for pause length

LC-NG-09 : Train station, 7+2+5 outputs for fluorescent lamps+flashing lights+lighting, for train station or signal box, start and stop of the process, potentiometer for the process speed

LC-NG-10: Workshop, 2+1+4+4+2+1 outputs for fire flickering+warning  light+welder+fluorescent lamps+lighting+servo **), lamps on/off, potentiometer without function

LC-NG-11: Fire flickering and candle light, 14 outputs for flickering light, Start or end phase, potentiometer for pause length

LC-NG-12: Event, 7+2+5 outputs for stage lights+stroposcope+flash lights, show and normal operation, potentiometer for pause length

LC-NG-13: Running lights, 14 outputs for lighting, program variant 8 complex running lights can be activated as one or more, potentiometer for process speed

LC-NG-14: Fairground lighting, 14 outputs for lighting, program variant 5 single real light effects, potentiometer for process speed

LC-NG-LS: Speaker set for LC-NG modules with loudspeaker output *), speaker Ekulit LSF-27M/SC, 32Ohm, 0.1W, dim. with sound capsule 29 x 13mm, choke 1mH, 2x resistor 220Ω/0.25W, electrolytic capacitor 22μF/25V

LC-NG-SS: Servo set for LC-NG modules with servo output **), Servo Tower Pro SG 90, servo circuit board 23 x 23mm, resistor 470Ω/0.25W, screws and adjusting lever

LC-NG-SG: Micro-Servo 9g (Tower Pro SG 90) **), operating voltage: 4.8-6.0V, positioning speed 60°: 0.10s (4.8V), positioning torque: 1.8kgcm (4.8V), dimensions: 22.8 x 12.6 x 22.8 (34.5)mm, weight : 9g, connection cable: 240mm, screws and adjusting lever

LC-NG-SH: Servo mount for servo SG 90, internal dimensions: approx. 23.5/12mm, screws and adjusting wire

LC-NG-SP: Servo circuit board for servo SG 90 **), power supply: DC or digital voltage: max. 30V, AC voltage: max. 20V, max. current for servo output peak (up to 10sec.): 1,000mA, duration: 500mA, dimensions: approx. 23 x 23mm, weight approx. 5g

LC-NG-PB: Power block (power distribution board), 2x14 connections in 2 sections, with LED display, max. total current 10A, dimensions: approx. 93 x 27mm, weight approx. 46g

LC-NG-PBS: Circuit board mounting set, for mounting circuit boards, for 5 up to 10 circuit boards, contents: 20 pan head screws 2.2 x 13mm, 20 PS-spacer-rolls 3.6/4mm

SHIPPING COSTS for EU: See SHIPPING TERMS (WebShop) or SHIPPING, RETURNS & PAYMENT (ebay).

All offered items are NEW ITEMS with 2 years Legal warranty and 14 days Right of withdrawal!