Dietz Elektronik DPA RC Automatic shuttle module analogous, intended exclusively for analogue vehicles and digital vehicles with a suitable decoder for analogue mode in transformer operation, digital controls cannot be connected!, suitable for stationary installation from Z scale on, the switching time and thus the dwell time are set on the potentiometer set at the ends of the shuttle route, the dwell time at the ends results from the set shuttle time minus the time required for the route, the two single-insulated end pieces must be sufficiently long so that the shuttle train can come to a standstill there (in the case of shuttle trains with a Locomotive, the two end pieces are of different lengths, in the case of railcars the same length), the two separation points must each be bridged with one of the enclosed diodes, if the vehicle does not come to a standstill, the polarity of the diode must be swapped, max. permissible operating voltage 24 volts, the Connection is via cable, dimensions: 57 x 68 x 23mm.
SHIPPING COSTS for EU: See SHIPPING TERMS (WebShop) or SHIPPING, RETURNS & PAYMENT (ebay).
All offered items are NEW ITEMS with 2 years Legal warranty and 14 days Right of withdrawal!
Basket discount
Value above 0.01 €
-
Discount:
3 %
Value above 150.00 €
-
Discount:
3.5 %
Value above 300.00 €
-
Discount:
4 %
Value above 450.00 €
-
Discount:
4.5 %
Value above 600.00 €
-
Discount:
5 %