ZIMO Elektronik MN Non-Sound-Decoder (Loco decoder) in MS technology (same driving behaviour, mapping, project organisation), for small scales N up to H0, DCC/MM/mfx/AC- and DC-analogous, NOT mfx-capable for MN170, MN180 and MN300, other types with automatic registration on mfx central stations, energy storage connection (NOT for the MN170 !), full NMRA-function-mapping up to F12, numerous setting options for the function outputs. MN170 to MN300 for gauge N, TT and small H0. MN330 and MN340 for H0 gauge. GENERAL special characteristics: Driving operation without interruptions after losing contact to the rails for 1 or 2 sec., prevention of stopping on tracks without current, AC analog operation including Maerklin impulse control to change direction (up to 35V), overcurrent protection for all outputs, protection against overtemperature, resilience 35V to 50V, motor control with 20kHz and 40kHz, for all DC motors and coreless motors (Faulhaber, Maxon), with replacement diodes also AC motors, also Fleischmann round motors, or low-frequency suitable motors, SUSI interface (alternate use of logic-level, on solder pads or connector), logic-level outputs, 2 Switch inputs (alternate use of logic-level), 2 Servo-control-wires (alternate use of logic-level, external 5V needed) and servo configuration with special CVs, as well as all known ZIMO-typical properties, ZIMO HLU and loco number recognition, RailCom.
INDIVIDUAL properties:
MN170: 9 wires, Dim. 12 x 8.6 x 2.5mm, Total current 0.7A, Motor 0.7A, Functions 0.5A, 6 Functions, 2 Logic level, (not mfx)
MN170F: 6 wires NEM651 and 1 free wire, Dim. 12 x 8.6 x 2.5mm, Total current 0.7A, Motor 0.7A, Functions 0.5A, 6 Functions, 2 Logic level, (not mfx)
MN170N: 6 pins NEM651, Dim. 12 x 8.6 x 2.5mm, Total current 0.7A, Motor 0.7A, Functions 0.5A, 6 Functions, 2 Logic level, (not mfx)
MN170R: 7 wires NEM652, Dim. 12 x 8.6 x 2.5mm, Total current 0.7A, Motor 0.7A, Functions 0.5A, 6 Functions, 2 Logic level, (not mfx)
MN180N18: Next18, Dim. 13.3 x 9.5 x 2.6mm, Total current 0.7A, Motor 0.7A, Functions 0.5A, 4 Functions, 4 Logic level, Energy-store-connection 15V, (not mfx)
MN300: 11 wires, Dim. 17.6 x 10.5 x 3.1mm, Total current 1.0A, Motor 1.0, Functions 0.8A, 6 Functions, 2 Logic level, Energy-store-connection 15V, (not mfx)
MN300F: 6 wires NEM651 and 5 free wires, Dim. 17.6 x 10.5 x 3.1mm, Total current 1.0A, Motor 1.0, Functions 0.8A, 6 Functions, 2 Logic level, Energy-store-connection 15V, (not mfx)
MN300P16: Plux16, Dim. 17.6 x 10.5 x 3.1mm, Total current 1.0A, Motor 1.0, Functions 0.8A, 6 Functions, 2 Logic level, Energy-store-connection 15V, (not mfx)
MN300R: 8 wires NEM652 and 3 free wires, Dim. 30 x 15.3 x 2.2mm, Total current 1.0A, Motor 1.0, Functions 0.8A, 6 Functions, 2 Logic level, Energy-store-connection 15V, (not mfx)
MN330: 11 wires, Dim. 30 x 15.3 x 2.2mm, Total current 1.2A, Motor 1.2, Functions 0.8A, 10 Functions, 2 Logic level, 1 IN1, 1 Switch input solderpad, Energy-store-connection 15V, single-sided assembly
MN330P22: PluX22, Dim. 30 x 15.3 x 2.2mm, Total current 1.2A, Motor 1.2, Functions 0.8A, 10 Functions, 2 Logic level, 1 IN1, 1 Switch input on connector, Energy-store-connection 15V, single-sided assembly
MN330R: 8 wires NEM652 and 3 free wires, Dim. 30 x 15.3 x 2.2mm, Total current 1.2A, Motor 1.2, Functions 0.8A, 10 Functions, 2 Logic level, 1 IN1, 1 Switch input solderpad, Energy-store-connection 15V, single-sided assembly
MN340C: 21MTC logic level, Dim. 28.5 x 15.3 x 2.2mm, Total current 1.2A, Motor 1.2, Functions 0.8A, 4 Functions, 6 Logic level, 2 Switch input on connector, Energy-store-connection 15V, single-sided assembly
MN340D: 21MTC amplified, Dim. 28.5 x 15.3 x 2.2mm, Total current 1.2A, Motor 1.2, Functions 0.8A, 8 Functions, 2 Logic level, 2 Switch input on connector, Energy-store-connection 15V, single-sided assembly